Model NO.: Hm-0505CB
Illumination Time: 24h
Cell Type: Lithium
Charging Time (H): 6
Usage: Garden, Street, Home
IP Rating: IP65
Certification: CE, RoHS
Voltage: 5V
With Light Source: With Light Source
Solar Panel Watt: 0.5W
Solar Panel Voltage: 5V
Warranty: 5years
Material: PS
Packing: 50set/CTN
Installation Height: 2 Meter
Lithium Battery: 3.7V1.2ah
Color: White, Black
Trademark: OEM
Transport Package: Canton
Specification: 17*7.6*5cm
Origin: China
HS Code: 9405409000
Working Principle:1,The solar street light relies on solar energy,which is clean,endless and enviroment friendly.The system is mainly composed of solar panel,light source,controller and battery.In daytime,when there is sunshine,the solar panel can convert the solar energy to electric energy and store it in the battery.
 2,Up to 5 metres and 90°detection range vertically and horizontally,automatically at night and remains ON constantly.
The motion sensor solar light is auto-light controlled.It will enter into work mode when night comes.At night,when people walks around,it will activate the motion sensor and the light will be turn on.When no people around ,it will enter into half power mode.Wall mounted light,very easy installation and smart control.
3,At rainy or cloudy condition,the battery shall supply power for normal lighting.The controller can judge the brightness of daylight and automatically switch on the light.
 Specification:
Model No. | HM-0505CW |
Solar Panel | polycrystalline silicon, 5V/0.5W |
lithium battery | 3.7V 1.2AH |
LED power | 1 Watt 810Lm |
charging time | 6 hours |
Discharge time | Full power 24 hours, half power 48 hours |
Working Lifetime | 50000 hours |
Installation Height | 2-12 m |
Working Temperature |  -40°C-+50°C |
CRI | Ra>75 |
lamp body material | PS |
IPÂ Rate | IP65 |
Output Lumen | 50 lm |
Product Size | 170*730*56MM |
Color Temperature | 6000-8000K |
Controller | light-controlled+PIR |
Function |
up to 5 metres and 120°detection range vertically,and horizontally,automatically at night and remains ON constantly |
Application | Stair,ground,wall,garden.road,etc |
Lighting mode:
OFF
DIM light
High Light
Â
Detail Show:

Product Freatures:
1, Integrated design of PIR motion sensor and night sensor.
2, Recharged by sunlight and store power for over night lighting.
3, Over 12Hours lighting time after one day charge.
4, Waterproof IP65 ,heatproof and durable.
5, Intelligent energy-saving.
OPERATION INSTRUCTIONS
Unlock and activate the device
The internal battery is locked from factory for safety shipment, so users have to use supplied key pin to click the " on/off " socket and unlock the battery and lighting system.
 How to install the device ?
Please use the supplied expansion pillar-hinge and screws to mount the mount the device on pole or wall anywhere outside you want for lighting.
Charging via solar panel
Please install the unit face south and make sure the solar panel can get the good sunlight directly without any shelter or glass.
Normally it can be fully charged in one day under ideal bright sunlight.
Night sensor function
It will auto turn on Dim light when in darkness or at night, and auto turn off when in day time or bright area.
Dim light mode
In order to save power, it will auto turn on Dim light when no Motion over there , but the brightness also can work as signal light.
Bright light mode
When people walk around 2 meters, it will turn on bright light.
Â

Carton:

Special Note:
Please fully charge the device before first use.
If there is no good sunlight in 3 months, the battery may be out of power , so you have a charge it by bright sunlight, when it's fully charged, please use supplied key pin to unlock the device and lighting system, otherwise, it can't work anymore.
If the light is blink means the power is very low, you have to charge it by sunlight soon ,otherwise, the device will stop working soon.
If there is no good sunlight or in winter sunlight ,especial in North countries, it may take longer time to fully charge the device and this is very normal for solar products
Â
Â
Â
Warning:
Keep the device away from fire, water and moist places in order to avoid explosion, leakage, moisture.
Any severe shock to the charge is not recommended.
No one except professional technicians should attempt to disassemble the charger in order to avoid damaging the charger.
Â
Application:


Our Service:
I. Pre-sale Servic
1, Prompt reply to your inquires or mails in 24 hours. If urgently, please contact us via Trademanager,skype or calling.
2, Professional suggestion for your promoting of our products.
3, Cheap or samples can be supplied to you after confirming your business card and other essential conditions.
II. Development of new product.
1, New molds evaluation service is available.
2, New products include our main products and other sort of hot-sell ones you want to develop.
III. OEM/ODM services are available.
Note: We can sign all the cooperative agreement and confidentiality agreement to help your marketing!
Our Office and Factory:
1, Prompt reply to your inquires or mails in 24 hours. If urgently, please contact us via Trademanager,skype or calling.
2, Professional suggestion for your promoting of our products.
3, Cheap or samples can be supplied to you after confirming your business card and other essential conditions.
II. Development of new product.
1, New molds evaluation service is available.
2, New products include our main products and other sort of hot-sell ones you want to develop.
III. OEM/ODM services are available.
Note: We can sign all the cooperative agreement and confidentiality agreement to help your marketing!
Our Office and Factory:

Iget King,Iget King Vape Pod,Iget King Vape 2600Puff Pod,Iget King Vape
Shenzhen Uscool Technology Co., Ltd , https://www.uscoolvape.com