5,000 inferior exports of returned LED lights were destroyed under the supervision of Shunde law enforcement officers. On June 13, the author learned from the Shunde Inspection and Quarantine Bureau that recently, when the department conducted on-site inspection of imported goods, it detected a large number of LED lights with serious quality and safety problems. In further investigation, it was found that the LED lights of the batch were inferior. Export returned products are pretending to be imported as qualified products. Accordingly, at present, the batch of inferior LED lamps have been completely destroyed under the supervision of the staff of Shunde Inspection and Quarantine Bureau, and the importing enterprises have also been subject to administrative punishment for violation of relevant laws and regulations of China.
According to reports, at the beginning of this year, a company in Shunde declared a batch of LED lights in Guangzhou, the total number is 5,000. After the goods arrived in Shunde, the staff of Shunde Inspection and Quarantine Bureau carried out on-site inspection of the batch of LED lights, and found that the batch of LED lights were exported and returned products, and most of the plastic lamp holders and lamp holders had fallen off, which had no use value.
"If normal transportation, it will not cause damage to the lamp holder and the lamp cap." In response to this situation, the inspection and quarantine personnel immediately alerted. After inspection by the authoritative organization, it was found that except for the fact that most LED lamps have the lamp holder and the lamp cap falling off and cannot meet the basic conditions of use, the LED lamps are not tested in electrical strength, marking, EMC, luminous flux and other items. Qualified, does not meet the standard requirements, the indentation of the lamp holder plastic in the ball pressure test far exceeds the standard requirements, does not have the flame retardant function, and has serious quality and safety hazards.
OBD Connector Section.
OBD:On Board Diagnostics.
One is to connect to the OBD interface of the vehicle through a special data line. Reading out the data and displaying it on the matching display screen is basically equivalent to adding a driving computer display screen. At ordinary times, the connecting cable can be plugged into the OBD interface all the time without removing it, and only the fixed display screen is needed. The owner can choose the data to be displayed by himself
OBD Connector Section
ShenZhen Antenk Electronics Co,Ltd , https://www.atkconnectors.com