After the W-type fuel injection pump body test was completed, a small high-speed in-line electrolytic deburring fixture for the fuel injection pump body (including the fuel injection pump), a small high-speed inline fuel injection pump body and a spray were gradually developed The high-pressure chamber electrolytic deburring of the pump body has been included in the main process and has been running for nearly a year. Due to the quality control of the electrolytic technology processing parts, the quality control method of the electrolytic technology processing parts is mainly to strictly control the electrolysis time, strictly control the current intensity, and effectively control the concentration of the electrolyte (adding chemicals in a timely manner). The detection method can be measured by visual inspection or using an endoscope. Cooperate with the display to make measurements and regularly replace the cathode head to ensure the accuracy of electrolysis.
The electrolytic deburring technology is applied to W-type and other fuel injection pumps. The burrs of each interpenetrating hole in the fuel pump body are completely removed, and the joint surface is smooth, which fully meets the design and process requirements. Therefore, we believe that this technology can be widely used in the deburring method of various complex cavity and deep hole parts produced by the company. Today, product quality is increasingly valued, more attention should be paid to the application of new technologies on the edge process, so as to enable deburring of the low-pressure cavity of the small-speed in-line fuel injection pump and the fuel injection pump. Modern vehicle power clean diesel power Bosch is committed to Passenger cars are moving towards a cleaner and more economical future. Bosch Automotive Diesel System Located in Wuxi City, Jiangsu Province, Bosch Automotive Diesel System was established in Kenian. As a proprietary company engaged in modern diesel injection technology and aftertreatment system, it is a partner you can trust and have great potential.
IP67 Waterproof LED Indicator Light
IP67 Waterproof LED Indicator Light
Yeswitch Z800series IP67 Waterproof LED indicator is applyable in electronic and electrical equipment. The LED color include red, yellow, orange, blue, green, white, bi-colors, for an almost unlimited choice of illumination colors.
Available in flat cap, small flat, round flat and high cap with graphics options, the LED indicator light is IP67 rating waterproof and passed the third party certificate.
|
Rating current |
20mA |
|
Rated voltage |
2-220VAC/DC |
|
Dielectric strength |
1000V RMS |
|
Contact resistance |
100≥MΩ |
|
Humidity |
Below 85%Rh |
|
Ambient temperature |
1000V 50/60Hz last for 1min |
|
Vibration |
10-55Hz 1.5mm |
Our Advantages
From the purchase of raw materials to the finished product, all production process (product development/plating/mold and equipment processing/ metalpressing/ plasticinjection/semi-automatic and fully automated equipment assembly, etc.) are completed in the factory. Our metal pressing and plastic injection own the advantages of 100% self-made mold, from a single form to the various forms of application. And we continuously keep innovation and enhance the technology in order to collaborate with our customers to design the most sophisticated products. Yeswitch Electronics Co., Ltd., whether in production base or in quality assurance department in the head office, have professional equipment and technical personnel. In addition to the annual new product development, product improvement and testing are performed as annual plan to ensure that listed products maintain in best quality. Therefore, our long-term customers/partners, get the best quality of the switches.
LED Indicator light, LED signal light , Waterproof Indicator light, IP67 Indicator light, Electronic Indicator light
YESWITCH ELECTRONICS CO., LTD. , https://www.yeswitches.com