75m Q345b Galvanized Telecom Angle Steel Tower

^{75m Q345B galvanized telecom angle steel tower}

Galvanized telecom angle steel tower

Angle steel watchtower. Zhutai Tower has plenty of export experience. Since our first overseas order from Pakstan in 1991 of 132 kV transmission poles, our products have been delivered to more than 70 countries and areas, including America, Australia , Russia , Genmery ,Span,Philippines ,Malaysia and so on.




Company Information
Shandong Zhutai Iron Tower Manufacturing Co., Ltd was established in 2015, with registered capital  100 million RMB, we are one of the China leading producers of power transmission tower and telecom tower products. Producing solutions for many different industries. Shandong zhutai has an international presence in mainland China, Central Asia and Eastern Asia, South America, Middle East and Africa.
Last year we have established a long-term technological partnership with Shantui, CR Powers, State Grid Corporation of China and others. Our valuable clients are inclusive of many leading manufacturers in varies industries such as power station, telecom industry, wind power and others.
Zhutai has a long developing plan and attaches a major importance to sustainability, we are committed to manufacturing top class of steel tower products.


Galvanized telecom angle steel tower

Packing and Delivering
Full protection packing and delivered by container, also we supply any type package any customer's requirements

Galvanized telecom angle steel tower

FAQ

Contact  Way
Yorke Zhong
Zhuttai Tower Trade Manager
 
 
 
Welcome, Ask Quotation! 
 

In power electronics with wiring, within the screen equipment connected to screen outside equipment, all want to by some special insulation terminals, the terminal will screen equipment and screen outer device connected with the line, have the effect of voltage (current) signal transmission.With terminal row, makes the wiring is beautiful and the connection between the distance line will make the connection secure, convenient construction and maintenance.Good insulation terminal besides have usually mechanical properties and electrical properties, also should have protection against aging, prevent salt fog, and natural loose etc.
According to GB1314.0-2008, our country aging proof standard requirements for the connector is as follows:
Connector should have aging resistance, insulation material not ceramic or thermosetting material connection devices should be in composition and pressure of the atmosphere with ambient air and ventilation of the heating chamber (box) in experiment.
Sample in the heating chamber (box) deposit within 7 d (168 h), link device in no T signs, the temperature of the heating chamber should be 70 ℃ plus or minus 2 ℃;On T marked connecting device, the temperature of the heating chamber should be (T + 30 ℃) plus or minus 2 ℃, such as: T = 85 ℃, the temperature of the heating chamber should be 115 ℃ + 2 ℃.
Speaking after the above processing, remove samples from the heating chamber, and stored at room temperature for at least 4 hours.
Under the condition of no additional amplification, samples should be normal or corrected vision can see crack, its material, but not sticky be bored with.Judgment method is as follows: a pan and put the sample in a pair of scales in another pan with Jordan farmar, farmar quality equal to the quality of the sample plus 500 g, then use dry cloth wrapped finger according to the sample and restore balance to balance.
After test, the sample may not appear can cause the damage of the do not meet the requirements of this section.
Insulation terminal belongs to the category of the connector, and the corresponding natural aging proof standard should be match with the national standards.Along with the national electric power reform, vigorously implement the various fields of Insulated Terminals requirements gradually increase, which will require buyers when buying insulated terminals to strictly control the quality of terminal products.Customers when buying insulation terminal, should buy meet the national standards and meet the testing requirements of terminals, especially notice that don't figure the price is low, miss chose insulation terminal of secondary processing materials.Insulation materials in the shape need to add additives, if it is a secondary recovery of saliva, which is inherently contain additives, shaping and adding additives, insulation materials must do not conform to the requirements, anti aging performance of insulation terminal row will also be discounted.

Non-insulated Cord-end

Non-insulated Cord-end,Cable Joint Production,Cord End Terminal

Taixing Longyi Terminals Co., Ltd. , http://www.txlyterminals.com