I have not used much of my mobile phone brand, I have used the O2 XDA Orbit of the Windows system camp, Apple, and there is a plus one mobile phone of the Android camp. Speaking about time ago to buy one plus 3T, is nothing more than the Apple phone does not support fast charge there is not dual card dual standby. Long heard of a powerful 3T performance, the legendary oppo vooc low-voltage flash technology blessing. Everything else allowed me to buy one plus 3T.
â–²As we all know, the performance of 3T has been ranked first in Android, and the powerful CPU has caused 3400mAh battery life to be poor.
â–² A plus 3T has DASH flash charge technology to make up for the dilemma of slightly less endurance.
â–² 3T DASH flash charge is in the form of low voltage 5V 4A, but the fact of having a giant pit is that it must be used with a Dash flash charge adapter and a Dash flash charge data cable to enable fast flash charge. If one is missing, flash charge mode cannot be enabled.
â–² The accessory price is also a giant hole. If the data line is broken, you can only buy the dedicated DASH data line with the chip. The key is that the Car Charger I want is out of stock. I would like to use a car charger that can only buy oppo, or when I buy a lot of oppo, I think it's better than charging a treasure.
It has long been heard that a great God has made a QC to VOOC converter. The reason why he has not been able to start is because of the instability in the previous period. It is also easy to pick up charging treasures. The key point is no shell. The great god always said and waited. Until the recent watching or no shells streaking, far-reaching decisions are still ranging.
Second, out of the box
â–² The mail is bare, the protective shell is always not
â–² VOOC DASH printed on the back, there are contacts used to adjust the output current (this article will be mentioned below)
â–²It is said that the original VOOC high-current USB socket is used
â–² It's no wonder that God did this without a shell, and the three-dimensional size is still quite large.
â–²However, this converter is too small compared to the original large and heavy adapter
First, let's take a look at the performance of the original Dash flash charger adapter and the Dash flash data cable:
â–² Instantaneous power consumption 19.7W, current 3.512A
Let's take a look at the performance of the converter on Anker supporting QC3.0:
â–²The converter uses QC protocol 9V at no load
â–² Converter uses QC 9V to step down to 5V, output 4.69V 3.17A current, 15W
â–² see the phone fast charge detection pass, turn on the DASH flash charge mode. The power meter shows 21.9W and current 3.143A. 3.5A worse than the original line, but the current is adjustable, the following
Let's look at the performance of the charging treasure, where the charging treasure must support QC2.0 or QC3.0, that is to say must have 9V or 12V output. And not all QC charging treasures support it. God told me that my millet's high distribution does not necessarily support it, and its quality is too bad, okay.
â–² My millet is equipped with a charging treasure for your support (Dai Shen says there is a chance to not support it), and the front end of the converter is 9.17V with no load.
â–² The charging cable perfectly supports Huawei's 5A data cable. The front-end output of the converter is 8.48V 2A, and the power is 17W.
â–² converter back 4.69V 3.22A, power 15W
â–² The use of charging treasure is about 3A, which is a bit lower than the official 3.5A. So here I need to increase the voltage
â–²Fortunately, God said that the output power can be increased. I'll increase my 10% here.
â–² Increased red dot power by 10% and increased from 3143 mAh to 3329 mAh
â–² Charging Po increased from 3,080 mAh to 3,296 mAh, perfect
God said that this converter conversion rate is about 95%, but the IC is too small to pay attention to heat dissipation
▲ Take the thermal imager to see the front temperature reached 88 °C
▲The reverse temperature reached 71°C. It's true that the temperature is quite high. Later on, it is going to be a passive cooling + housing.
This conversion head is undoubtedly an artifact for one plus 3, 3T and OPPO mobile phone users, because the market is not able to support the charging treasure of VOOC and DASH flash charge in addition to OPPO original 349 charger. With this converter you don't need the original data line with chip. Any data line that supports 4A current can support DASH. And car charger as long as you buy a head that can support QC2.0 or 3.0 plus this artifact can be. One plus 3T or OPPO phone strongly recommend this QC to DASH converter.
AC wall 5V 2A power adapter with multiple tips works for many small 5V electronics. Like Scanner, Router, Bluetooth speaker, Foscam Wireless IP Camera, CCTV camera, USB hub, bluetooth GPS Receiver, tv box, tablets, Baby Monitor, Graco Swing, Home Phone System, VoIP Telephone Routers, Serato DJ Controller, DVR, ADSL Cat, External battery, hubs, switches, Led Strip, String Lights, vibrator, Raspberry pi 3 Raspberry Pi A/A+/B/B+ Raspberry Pi Zero and more 5V devices. (5V ONLY)
Worldwide Input: 110-240V; Output: 5V 1000mA, 1.5A, 1.75A, 5V 1A, 5V 500mA, 5V 2.1A, Max 10W. DC Tip Polarity: Central Positive(+). Please read manual carefully before using 5vdc power supply.
Design-safeguard features against incorrect voltage, short circuit, internal overheating and overloading. This 5v Ac power supply charger is made from quality material to ensure the long lifetime. Power your 5v electronics perfectly and replaces lots of 5 volt power chargers
Package include: 1 x High Quality 5V 2A AC DC Power Adapter, 1 Set x Tips
5V Switching wall charger 6V Switching wall charger 9V Switching wall charger 12V Switching wall charger 15V Switching wall charger 19V Switching wall charger 24V Switching wall charger 36V Switching wall charger 48V Switching wall charger
Shenzhen Waweis Technology Co., Ltd. , https://www.waweisasdapter.com