Factory Price Tliii 95 Tl125III Stainless Steel Cable Carrier

Type
Type of the Moving Cables and Pipes Stainless Steel Conveyor Chain:
 1.Supporting Board I Integral Type
 2.Supporting Board II Separate Type
 3.Supporting Board III Frame Type


Feature
The feature of the  Moving Cables and Pipes Stainless Steel Conveyor Chain:
1.The drag chain can adapt to max. Moving speed of 40m/sec.
 
2.When at the max moving speed, the sound pressure of noises shall not be greater than 68 db.
 
3.The service life of the drag chain shall not be less than 1 million times(reciprocating).  


-Specifications 
 
 1.Bending Radius: 50mm~750mm
 2. Materials: Stainless steel or  galvanized steel
 3. Length: customized
 4. Application:  warehouse, large machinery, robots etc., as short-range,oil,gas, water hoses and cables moving purposes at the same time.

  Pictures

 -Remark: 
 1.The cable drag chains are produced by using Italian technology.
 2. When nonstandard bend radius or nonstandard cable carrier chains are required, we can make them according to the user's requirements.
 3.  When the max width Bamx is exceeded, compound type cable carrier chains that consist of 3 chain crawlers can be used.
 
-Components
 
TL series cable drag chain is composed of chain plate( top quality stainlesssteel with chromium plated), supporting board(extruded aluminum alloy) and pinshaft( alloy), etc.


-Order notice
 
1. Length: 
2. Cable or pipe Max. Dia.:
3. Supporting board type:
 
4. Bending Radius(or the curved height ):
Contact 
Amy Type
Type of the Moving Cables and Pipes Stainless Steel Conveyor Chain:
 1.Supporting Board I Integral Type
 2.Supporting Board II Separate Type
 3.Supporting Board III Frame Type


Feature
The feature of the  Moving Cables and Pipes Stainless Steel Conveyor Chain:
1.The drag chain can adapt to max. Moving speed of 40m/sec.
 
2.When at the max moving speed, the sound pressure of noises shall not be greater than 68 db.
 
3.The service life of the drag chain shall not be less than 1 million times(reciprocating).  


-Specifications 
 
 1.Bending Radius: 50mm~750mm
 2. Materials: Stainless steel or  galvanized steel
 3. Length: customized
 4. Application:  warehouse, large machinery, robots etc., as short-range,oil,gas, water hoses and cables moving purposes at the same time.

  Pictures

 -Remark: 
 1.The cable drag chains are produced by using Italian technology.
 2. When nonstandard bend radius or nonstandard cable carrier chains are required, we can make them according to the user's requirements.
 3.  When the max width Bamx is exceeded, compound type cable carrier chains that consist of 3 chain crawlers can be used.
 
-Components
 
TL series cable drag chain is composed of chain plate( top quality stainlesssteel with chromium plated), supporting board(extruded aluminum alloy) and pinshaft( alloy), etc.


-Order notice
 
1. Length: 
2. Cable or pipe Max. Dia.:
3. Supporting board type:
 
4. Bending Radius(or the curved height ):
Contact 
Amy

Through-wall Terminal

The through-wall terminals can be installed side by side on panels with thicknesses ranging from 1mm to 10mm, and can automatically compensate and adjust the thickness of the panel to form a terminal block with any number of poles. In addition, isolation plates can be used to increase air gaps and creepage distances.

Through-Wall Terminal,Through Wall Terminal Block,Through-Wall Terminal Extender,Through-The-Wall Terminal Block

Sichuan Xinlian electronic science and technology Company , https://www.sztmlch.com