Mitsubishi Chemical and Pioneer collaborate to develop OLED lighting components with a luminous efficacy of 52 lm/W

[High-tech LED News] In order to fully develop the OLED lighting business in 2014, Mitsubishi Chemical and Pioneer of Japan jointly developed the OLED components for lighting using the coating process from January 2010. Recently, a white light-emitting OLED device using a coating process to form a light-emitting layer has been successfully developed, and the luminous efficiency is as high as 52 lm/W, and the luminance half-life is as long as 20,000 hours at an initial luminance of 1000 cd/m 2 .

This element is formed by filming the lower layer of the element and the light-emitting layer by a coating process, and the upper layer is formed by vapor deposition.

Mitsubishi Chemical's OLED lighting source module "VELVE", which was scheduled to be launched in July 2011, uses a coating process only when the film is formed in the lower layer of the component. The luminous efficiency is 28 lm/W, which is scheduled to be mass-produced by the Northeast Pioneer.

Power Meter Backlit

WARNING!

Do not plug two or more meters together!

IMPORTANT

Don't plug in an appliance where the load exceeds 16 Amp. Always ensure the plug of any appliance is fully inserted into the meter outlet. If cleaning of the meter is required, remove from mains power and wipe meter with a dry cloth.

KEYBOARD DEFINITION

1). SET: Set price with button UP.

2). MODE: Exchange display state.

3). UP: Set price combined with button SET.

GENERAL FEATURES

1).Display line power.

2).Display and memory accumulative total power quantity.

3).Display and memory total power charge of price.

THE DATA DISPLAY

Press MODE button the data displays as follows:

W â†’KWh â†’PRICE â†’COST/KWH

â†‘_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _â†“

1). Plug in socket and power on, the meter will display real power.

2). Press MODE button once again and release, the meter will display accumulative KWh.

3). Press MODE button once again and release, the meter will display total power charge.

4). Press MODE button once again and release, the meter will display COST/KWH.

SETTING PRICE OF COST/KWH

1). Press SET button during display COST/KWH,the first digital COST/KWH flash, press UP button to set it.

2). Press SET button once again and release, the second digital COST/KWH flash, press UP button to set it.

3). Press SET button once again and release, the third COST/KWH flash, press UP button to set it.

4). Press SET button once again and release, the fourth COST/KWH flash, press UP button to set it.

5). Press SET button once again and release, the radix point COST/KWH flash, press UP button to set it.

DATA CLEAR

Press and hold MODE button for 5 seconds will clear KWH,PRICE and COST/KWH data.

Power Backlit, Backlit socket, power meter Backlit, energy meter Backlit, backlit adaptor, backlit plug socket

NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsocket.com