The City of Los Angeles approved LEDway streetlights from BetaLED® to replace modern cobrahead fixtures in local and residential neighborhoods as part of the green streetlight program.
The City's plan includes retrofitting a total of 140,000 high-pressure sodium (HPS) luminaires to LED technology over the next five years. It's estimated LED streetlights will reduce the City's energy usage by 40 percent and lower carbon dioxide emissions by 40,500 tons per year or The equivalent of taking 6,700 cars of the road. The City will save approximately $10 million annually from a combination of reduced energy usage and lower maintenance costs.
"Congratulations to the City of Los Angeles for creating an initiative that provides a safer and more environmentally sustainable community for its citizens," said Al Ruud, president of Ruud Lighting, Inc. "We`re excited that LEDway streetlights are a part of the The LEDs are retrofit program to date. The project validates that LED technology is ready for the mainstream."
The green streetlight program, developed in collaboration with the Clinton Climate Initiative (CCI), is funded by a combination of energy rebates, the street lighting assessment fund and loans and will be repaid throughout a seven-year period using the savings gained from the retrofit By the eighth year, the City will see an annual savings of $10 million.
Waterproof Vertical Mount D-Sub Connectors
waterproof D-sub system is IP67 rated. These panel-mount connectors are available in solder cup as well as right angle and vertical PCB mount types. The cable-mount connector kit includes the connector, which has solder cup contacts. These connectors are available in 9-, 15-, and 25-positions in standard density and 15-, 26-, and 44-positions in high density. The recommended wire gauge for the solder cup connector is 22 AWG to 26 AWG.
These panel-mount waterproof D-subs are designed for rear-mount applications in panels that are up to 2.0 mm thick. They come with two sets of jackscrews. One jackscrew set is 5 mm long for panel thickness up to 1.2 mm, and the other is 6 mm long for panel thicknesses from 1.2 mm to 2.0 mm.
Cable mount D-sub connector kits come with the backshell, seal, thumbscrews, and solder cup connector. They are also easy to install. Simply fit the cable through the backshell, terminate the wire to the solder cup contacts, and hand tighten the cable nut on the rear of the backshell. The backshell will seal a particular range of cable diameters depending on the position count of the connector. Consult the datasheet for specific cable diameter ranges.
Specifications
Current rating
Standard D-sub: 5 A
Hi-density D-sub: 2 A
Breakdown voltage: ≥ AC 500 V/1 minute
Insulation resistance: ≥ 500 MΩ @ DC 500 V
Contact resistance: ≤ 20 mΩ
Material
Contacts: copper alloy, gold-plated
Connector body: nylon 9T or PBT, UL Recognized
Shell: steel, nickel-plated
Applications
DV camcorder
DV VTR
Non-linear editing system
Broadcast monitor
Betacam deck
Panel Mount Waterproof D-Sub Connectors:
Water Proof D-Sub, Standard Density, Male, Panel Mount
Water Proof D-Sub, Standard Density, Female, Panel Mount
Water Proof D-Sub, Standard Density, Female, PCB Mount
Waterproof solder cup, stamped & formed contact D-sub waterproof
solder cup,machined contacts D-sub waterproof
Vertical Mount Waterproof D-Sub Connectors:
Combo Power + Signal D-Sub Connector, Vertical Mount, Pluge Type,
right angle D-sub waterproof
IP67 rated Combo power D-sub waterproof
Standard Density, Waterproof Vertical Mount D-Sub Connectors, High Density Waterproof Vertical Mount D-Sub Connectors,IP67 D-Sub Connectors Vertical Mount,Board Mount Waterproof Vertical Mount D-Sub Connectors
ShenZhen Antenk Electronics Co,Ltd , https://www.antenksocket.com