When my colleagues at the office initially turned to me Amway monitor stand, my heart was not fluctuating (since my monitor was already supported...); until he said, “You can watch movies in the office comfortably with whatever posture you like. "I think I can really think about it.
I am very lazy and I don't have much patience to do comparisons before buying. Because before I only heard that Le Song did a good job with monitor brackets, I didn't understand too many other brands of products. Taking into account the pocket size, in the end of the East took the song song dual-screen bracket in the most introductory one.
Music (Loctek) DLB502-D Computer Stand Monitor Stand Ergonomic Bracket Full-size Gas Spring Bracket Dual-Screen Stand 10-27 inch 409 Yuan Jingdong direct link View Encyclopedia Personally think that the delivery service of an East is almost impeccable. The next day the order was delivered to my hand. However, no additional packaging was provided during transportation. When I saw it, it was directly the product's box. The edge is slightly broken and the whole is still intact. Just the style of this box reminds me of the home goods I bought at home before.
There are 9 parts or bags in the box. I am very satisfied with the point that, in addition to the required screws, along with the product, there is a screw driver of the appropriate size required for screwing. All 20 screws come in only two different sizes, which greatly reduces the complexity of the installation.
There are two fixing options for the bracket and the tabletop for the user to choose from: one is to use a threaded rod to hold the bracket to the edge of the table (clamp mounting), the other is to fix the hole after the desktop is punched (hole mounting) . The former does not need to destroy the desktop, but the edge of the table is required to extend beyond the leg baffle for a certain distance, and is limited by the thickness of the table (within 100 mm); the latter has a wider scope of application, but it must perform some damage to the table top. I chose the first method in use. Apart from the main body of the bracket and the necessary screws, only the three parts shown in the figure below were used. For engineering dogs, the installation is simple enough to complete without instructions.
Well, after you blow the cow and open the instructions, you can assemble it a little bit according to the given steps. (The five-minute installation process is omitted here.) It is worth mentioning here that in order to adapt this design scheme to any table thickness within 100 mm, the distance between the end face of the threaded rod and the base of the bracket (this distance should be equal to the thickness of the table top) The same) can be adjusted to different degrees by changing the position of the hole on the metal support plate and adjusting the rotary screw rod. In this way, as long as the thickness of the user's table board is within the allowable range, this solution can certainly fully fix the bracket.
After the installation is complete, the final results are shown in the figure below. Here we would like to thank our colleagues and colleagues who did not read books. It can be seen that using this monitor stand, the two monitors are completely "hanging" in the air, instantly expanding the disposable area of ​​the desktop. With 6 axes on each cantilever, the display can be adjusted to almost any position within the hemisphere with a cantilever length radius, and can be hovered at any angle at any angle - this makes the user almost It is possible to adjust the sitting position arbitrarily, and it is very convenient for others to display the content on the display, and more importantly, to achieve a great degree of "watching movies in the office in any position".
The stand is provided with a vertical screen rotation system that allows the display to rotate 360 ​​degrees on the display plane. Two displays can be configured with horizontal-horizontal, horizontal-vertical, vertical-vertical and other combinations. For programmers with more programming and designers with special needs, this function is very important.
In terms of design details, manufacturers have also made many considerations. There is space on one side of the bracket cantilever to accommodate all types of power and data cables connected to the monitor. This design has greatly improved the neatness of the desktop (again, once again, the scholar has not read a book, the desktop is simply clean without a touch of work), and indirectly increases the available area on the desktop. In addition, the elasticity of each shaft of the bracket can be adjusted by the screws on the shaft. The most important thing here is to control the cantilever's torque control valve. When the monitor used is heavy, it needs to be tightened so that it will not fall down. When the display is lighter, the valve needs to be loosened to ensure The display will not be cantilevered - in short, the adjustable and elastic design of the part allows the stand to accommodate a variety of different weight displays and greatly enhances the applicability of the product.
Significant savings in desktop space. This is one of the most important advantages that individuals personally think of such monitor stands. For users of dual monitors in particular, imagine that when the desktop does not have a bulky monitor base, an extra area can be used in an instant to put away... those messy and useless things.
The display can be placed anywhere. This is a big plus for programmers or designers who often need to put a screen upside down.
The elasticity of the bracket joints can be adjusted. For different users, when the display weight is different, it is necessary to adjust the tightness of each joint and aeroelastic arm to ensure that the monitor can just "hover" in the desired position.
The installation process is simple and easy to operate.
Can't pan. This bracket has no freedom of translation. Although most of the time, the monitor can always be adjusted to the desired position by rotating the joints, but because the front, rear, left and right can not be translated, the bracket can not cover all the positions and angles on the table.
Slightly heavy. Because of the material's sake (steel and plastic), this bracket is heavy (official weight 2.6kg). However, this will only cause some inconvenience during the installation process. Once installed, the user will not have any sense of product weight during use.
The level of workmanship needs to be improved. This product has done a good job overall, but in the details, such as plastic edge processing, the level of work still needs to be improved. However, taking into account the price and positioning of products, this does not seem to require
Stylus Pen For Microsoft Surface
Product catagories of Stylus Pen For Microsoft Surface, which just can be worked on below Surface model, Please confirm your surface model before buying.
Microsoft Surface 3; Microsoft Surface Pro 3; Microsoft Surface Pro 4; Microsoft Surface Pro 5; Microsoft Surface Pro 6; Microsoft Surface Book; Microsoft Surface Laptop; Microsoft Surface Studio.
Stylus Pen For Microsoft Surface,Tablet Touch Pen,Touch Screen Stylus Pen,Universal Stylus Pen
Shenzhen Ruidian Technology CO., Ltd , https://www.wisonen.com