The introduction and improvement of the series of policies will be the “good medicine†for the development of the robot industry in the future; and the robot companies will adopt flexible production to maintain the balance of industrial development. Policy for robots "fire reduction" Flexible production will maintain industry balance 2016 is the first year of China's intelligent robot. This year, under the influence of multiple factors such as industrial transformation and upgrading, policy support, capital influx, and companies competing for strength, the domestic industrial robot market is ushering in a wave of blowout period. The reason why the robotics industry is springing up is due in large part to the fact that it is also an important industry supported by various government policies and funds. According to statistics released by the Ministry of Industry and Information Technology in the first half of 2016, there are more than 800 companies involved in the production of robots in China, and there are more than 40 industrial parks that are mainly based on the development of robots. According to data from the National Bureau of Statistics, from January to November 2016, the output of industrial robots in China was 64,000 units, an increase of more than 90% from the annual output of 2015. In just five years, nearly 3,000 Chinese robot manufacturers have grown. The White Paper of the Robotics Industry 2016 shows that as of October 2016, more than 50,000 new industrial robots have been added in the Pearl River Delta and Yangtze River Delta regions, an increase of more than 30% from the same period in 2015. It is expected that the number of robots in these regions will increase in the next few years. The growth rate will remain at more than 30%. In addition, with the increase in the use of industrial robots, China is currently forming four major robotic industry clusters in the Bohai Rim, the Yangtze River Delta, the Pearl River Delta and the Midwest, which will further enhance the level of development of smart manufacturing around. However, at the same time as the expansion of the domestic intelligent robot industry, various problems have gradually surfaced, such as over-investment, low-end products, and even the appearance of financial subsidies. To this end, the state has continuously introduced various policies to guide the rational and coordinated development of the industry. In the first half of 2016, the "Intelligent Manufacturing Development Plan (2016-2020)", "Robot Industry Development Plan (2016-2020)", and "Ministry of Finance Circular on Issues Governing the Subsidy of the Robot Industry" and other documents are from different perspectives. In the process of the development of the domestic robot industry in the development of various ills and chaos to combat and governance. At present, various new policies are still being introduced and improved. In the second half of 2016, the State Council issued the “Thirteenth Five-Year National Strategic Emerging Industries Development Plan†and made comprehensive arrangements for the development goals, key tasks, and policy measures of China's strategic emerging industries during the “Thirteenth Five-Year Plan†period. Afterwards, the Ministry of Industry and Information Technology released the “Regulations for Industrial Robots Industryâ€, which includes industrial robots and industrial robots in terms of comprehensive conditions, enterprise scale, quality requirements, R&D and innovation capabilities, talent strength, sales and after-sales services, social responsibility, and supervision and management. The integrated application company has regulations. 
Li Qiang, deputy general manager of the company's harmonics, said in a keynote speech that the concept of coexistence between robots and humans is becoming clearer, and robots with lightweight human-computer interaction are the latest directions for the development of industrial robots. The design of the robot ensures that people can assist people in sensitive, accurate, and flexible work from simple to complex work under the premise of safety, freeing people from simple and boring work and inspiring them to engage in more creative and more creative work. Work, on this point, people in the industry can basically reach a consensus. The flexible production evolved from the past lean production model to the parallel production model. Flexible production refers to a multi-organizational structure, lean manufacturing, and rapid agile production model. The goal of flexible production has three dimensions: First, flexible manufacturing must be applied to a wider range of products, and at the same time the time must be quickly produced in the short term, and at the same time, the cost must be reduced. Therefore, three dimensions need to be considered for integration or modularization. Can get a better balance. However, today's robotics specialty manufacturers are demanding high weight, size, and heat dissipation of robot joints when designing new models. Li Qian believes that only when the robot is designed, the reducer is integrated into the overall structural plan, integrated with the area of ​​the housing, etc., and the unnecessary parts are removed to design a more compact body.
Li Qiang, deputy general manager of the company's harmonics, said in a keynote speech that the concept of coexistence between robots and humans is becoming clearer, and robots with lightweight human-computer interaction are the latest directions for the development of industrial robots. The design of the robot ensures that people can assist people in sensitive, accurate, and flexible work from simple to complex work under the premise of safety, freeing people from simple and boring work and inspiring them to engage in more creative and more creative work. Work, on this point, people in the industry can basically reach a consensus. The flexible production evolved from the past lean production model to the parallel production model. Flexible production refers to a multi-organizational structure, lean manufacturing, and rapid agile production model. The goal of flexible production has three dimensions: First, flexible manufacturing must be applied to a wider range of products, and at the same time the time must be quickly produced in the short term, and at the same time, the cost must be reduced. Therefore, three dimensions need to be considered for integration or modularization. Can get a better balance. However, today's robotics specialty manufacturers are demanding high weight, size, and heat dissipation of robot joints when designing new models. Li Qian believes that only when the robot is designed, the reducer is integrated into the overall structural plan, integrated with the area of ​​the housing, etc., and the unnecessary parts are removed to design a more compact body.
Electric Switch Panel,Marine Switch Panel,Boat Switch Panel Marine ,Automotive Switch Panel
Dongguan Andu Electronic Co., Ltd. , https://www.idoconnector.com