After the lamp is turned off, the energy-saving lamp has a gap flash, which is not a quality problem of the lamp. The main reason is that the installation of the electrical circuit is not standardized, and the switch is set at the zero line. Just change the zero line of the incoming line and the live line. A switch with a xenon lamp is used, and a microfluidic path can still be formed after the lamp is turned off, or a double switch can be installed by a line to cause a flashing phenomenon after turning off the lamp. As shown in the figure, the maintenance circuit diagram of the electronic energy-saving lamp.
Warning Light,Revolving Light,Rotary Beacon
Chinasky Electronics Co., Ltd. , https://www.chinacctvproducts.com