After using two-way communication between I/A's and PC or other dcs, security becomes a prominent problem, and efforts should be made to avoid unnecessary vandalism. Security is a very complex issue, please refer to the professional literature. I will not discuss in detail here, but only make some suggestions on the general principle:
I. When developing software on its own, security must be considered, including read and write access to control processor data, event handling of software (unexpected interruption of process, infinite loop of program, boundary processing, memory release, etc.) TCP/IP operation authority.
II. For professional software, due to its powerful function, when it is used, the unnecessary parts of the software should be closed, and the operation of the software should be password-authorized.
III. Security must be considered when establishing a communication program handshake mechanism.
IV. Strengthen the construction of relevant safety rules and regulations to avoid artificial damage.
A gateway is set between the V.DCS system and the MIS/SIS system, and the firewall is configured when the enterprise MIS/SIS system is connected to the INTERNET.
DB25 Female Connector, DB25 Male Connector,DB9 Male Connector,DB9 Female Connector,DB9 Right Angle Backshell,Molded D-Sub Cables
The On-site injection molding enables us to custom mold your D-Sub assemblies to your specs with logos. We are tooled for:
DB9 molded cables,,DB25 molded cables, DB50 molded cables, HD15 molded cables
DB Backshell or Boot-Kit Cables: The backshell cans and boot-kits are available for D-Sub DB15 cablesD-Sub DB37 cables.
Backshells are offered for: D-Sub high-density HD26, HD44, HD62, HD78
D-sub cable, DB cable, 9pin DB cable, molded DB connector, Data Cable
ETOP WIREHARNESS LIMITED , https://www.oemmoldedcables.com