Chemically strengthened glass surface stress meter ASM-100-3
The glass surface stress gauge is used to measure the surface stress of chemically strengthened glass. By allowing the light to propagate along the glass surface, the surface stress and the depth of the stress layer are measured according to the photoelastic technique. This machine is equipped with a computer, which can reduce the error of the measuring person and also facilitate the management of the measurement data. The user can additionally select the automatic dropping and thickness measurement configuration to achieve an overall increase in measurement efficiency.
First, characteristics:
1. With advanced non-destructive testing methods (refractive photoelastic analysis principle).
2. Automatic measurement due to small personal error caused by the tester.
3. Ability to automatically save data using a computer for easy quality management.
4. Samples with poor test conditions can be measured manually.
5. Using LED light source, long service life, up to 10,000 hours.
6. The use of a glass calibration plate thus minimizes machine errors.
This machine features descriptions:
1. At the same time of continuous measurement and automatic determination of pass/fail according to the set interval.
2. In the continuous measurement, the system automatically saves the measured data and accumulates the number of measurements (qualified/unqualified).
3, in addition to continuous measurement, you can also freely choose a single measurement, manual measurement and other measurement methods.
4, to achieve the software to control the automatic drip function (to save the waste of labor caused by manual operation) (additional payment option).
5, equipped with thickness measurement device, the software automatically measures the thickness of the sample (additional payment options).
Second, equipment specifications:
Measurement range (stress): 0-1000Mpa Measurement accuracy (stress): ± 20MPa
Measurement range (depth of stress layer): 0-200μm Measurement accuracy (depth of stress layer): ±5μm
Measuring object: chemically strengthened glass
Measuring shape: Flat glass 12*7mm or above
Measuring principle: principle of photoelastic analysis of refractometer
Light Source: Dedicated LED Wavelength 590nm ±10nm
Prism: ND=1.72
PC: Dedicated (OS, Measurement Software Installed)
Analysis Software: ASM-100-3 Special Software
Power Supply: AC220V 3A
Size (measurement head): 300×600×250MM
Weight (measurement head): approx. 14KG
Third, the configuration list
1, ASM-100-3 measuring head: 1 set
2, 12mm*7mm special prism (installed on the ASM-100-3 measuring head)
3, CCD camera system set (installed on the ASM-100-3 measuring head)
4, Computer 1: DELL
5, software dog 1 (on the host)
6, ASM measurement software: 1 set (installed on the computer)
7, measuring liquid: 1 package (20ml)
8, glass calibration tablets: 1
9, XP operating system
10. Manual: Chinese 1
11. PLT-0025 Thickness Measurement and Assembly: 1 set (optional extra payment)
(Equipment pictures)
(Software Testing Interface)
Since AC power cord is output of high voltage electric power, there is a risk of electric shock injury, therefore, All the AC power cord must comply with safety standard to produce. AC (Alternating Current) Power cord is to transmit high voltage. It is used to drive machinery or home appliances.
AC Power cord,power cable, batter cable, power cord
ETOP WIREHARNESS LIMITED , https://www.wireharnessetop.com